泡沫復合板如今被廣泛應用，不過使用時間久了就會發現出現各種問題，那么泡沫復合板使用中怎么會產生脫色和變形？下面一起來看看怎么回事吧。

　　Foam composite board is now widely used, but after a long time, it will find all kinds of problems, so how can decoloration and deformation occur in the use of foam composite board? Let's see what's going on.

　　脫色

　　decolorizing

　　泡沫復合板的脫色或變色，大部分是在選板時選材不當造成的。我們平時看到的泡沫復合板有兩種，分為室外板和室內板。這兩種面板表面的涂層有很大的不同，這也決定了它們適用于不同的地方。

　　The decoloration or discoloration of foam composite board is mostly caused by improper material selection when selecting board. The foam composite board that we see at ordinary times has two kinds, cent is outdoor board and indoor board. The coatings on the surfaces of the two types of panels are quite different, which makes them suitable for different places.

　　室內面板表面涂有一些樹脂，樹脂不能完全適應室外惡劣的環境。室內板一旦在室外使用，會加速室內板的老化程度，導致板件變色、變色；戶外面板的表面會選擇具有抗紫外線能力和抗老化能力的樹脂涂層。

　　The interior panels are coated with some resin, which is not fully adapted to the harsh outdoor environment. Once the indoor board is used outdoors, it will accelerate the aging of the indoor board, resulting in discoloration and discoloration of the board; The surface of outdoor panels will be selected with resin coating with uv resistance and anti-aging ability.

　　這種戶外面板比室內面板貴。大多數施工單位為了從中攫取利潤，將室內板換成室外板，造成嚴重的變色、變色。

　　These outdoor panels are more expensive than indoor panels. Most construction units in order to grab profits, indoor boards into outdoor boards, causing serious discoloration, discoloration.

　　變形

　　deformation

　　一旦表面變形或鼓起，原因是多方面的，這種情況在施工過程中經常出現。我們曾經認為這是濟南泡沫復合板本身的質量。經相關部門分析發現，主要的原因是我們采購的泡沫復合板這類面板的基礎材料是高密度板或木板，這些材料用于戶外。它的使用時間非常脆弱，這些材料在日曬雨淋后會變形和膨脹。

　　Once the surface deformation or bulging, the reasons are many, this situation often occurs in the construction process. We used to think that this is the quality of ji 'nan foam composite board itself. After analysis by relevant departments, it is found that the main reason is that the basic materials of foam composite panels we purchase are high-density boards or boards, which are used outdoors. Its use time is very fragile, and these materials will deform and expand after exposure to the sun and rain.

　　另外，還有可能會出現脫落開膠現象。出現脫落或者是開膠等現象的時候，一般都是因為在選擇黏合劑時，沒有選擇優質或者是好的黏合劑，從而造成這一種情況的，而硅酮膠就是一個為合適的黏合劑，但是當今社會，在購買黏合劑的時候，銷售商都是會推薦去購買快干膠的，這種快干膠是可以在室內使用的，一旦用于室外，就會出現脫膠或者開膠情形的。

　　In addition, there may be a peeling phenomenon. Does appear fall off or glue etc. Phenomenon, generally because when choosing adhesives, choose the high quality or not is a good adhesive, so as to contribute to this kind of situation, and silicone rubber is a the most suitable glue, but today's society, at the time of purchase adhesive, vendors are will recommend to buy quick-drying glue, This quick-drying glue can be used indoors, but once used outdoors, there will be degumming or degumming.

　　以上就是泡沫復合板使用中怎么會產生脫色和變形問題的相關內容了，希望對大家有所幫助。想了解更多知識歡迎來電咨詢，也可以通過點擊網站http://m.dyhongsenfg.com進行咨詢。

　　The above is the foam composite board in the use of how to produce decoloration and deformation of the related content, I hope to help you. For more information, please call us or click on http://m.dyhongsenfg.com.